Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcvax!nikhefk!henkp
From: henkp@nikhefk.UUCP (Henk Peek)
Newsgroups: comp.sys.att
Subject: Re: 6300 Clock & PC-DOS 3.1
Message-ID: <107@nikhefk.UUCP>
Date: Mon, 19-Jan-87 19:49:50 EST
Article-I.D.: nikhefk.107
Posted: Mon Jan 19 19:49:50 1987
Date-Received: Wed, 21-Jan-87 02:12:43 EST
References: <254@rocksanne.UUCP> <489@uvm-gen.UUCP>
Reply-To: henkp@nikhefk.UUCP (Henk Peek)
Organization: Nikhef-K, Amsterdam (the Netherlands).
Lines: 16
Keywords: realtime-clock 6300

=Could you make that two requests, but change mine to PC DOS 3.2 (if it makes
=any difference).  Also, does anyone out there have any information on what
=AT&T DOS does with other things (interrupts, etc), that normal PC DOS dosen't
=need to bother with?
=John R. King			USENET: decvax!dartvax!uvm-gen!king
=The University of Vermont	MODEM:  (802) 862-2186  The SLC TBBS (SYSOP)

I have a realtime clock support program. A friend of me has written it.
He is not on the net. Who was the first guy which wanted it??
I will send it by mail.

So far as I known there are no special interupts...
There are only 2 special bios calls to read and set the realtime
clock. (See the bios listings in the hardware manual).

henk peek,  henkp@nikhefk.UUCP   ..mcvax!nikhefk!henkp.UUCP