Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!nbires!isis!udenva!slindahl
From: slindahl@udenva.UUCP (Steve "Mr. MBA" Lindahl)
Newsgroups: comp.sys.cbm
Subject: VT52 Term Question
Message-ID: <2759@udenva.UUCP>
Date: Mon, 19-Jan-87 00:24:40 EST
Article-I.D.: udenva.2759
Posted: Mon Jan 19 00:24:40 1987
Date-Received: Mon, 19-Jan-87 23:37:35 EST
Reply-To: slindahl@udenva.UUCP (Steve "Mr. MBA" Lindahl)
Distribution: world
Organization: Universe of Diversity II
Lines: 14

Well, after receiving the source code for the vt52 emulator, I was able to find
out more about the program.  I know the document data as presented in the
source code and the instruction manual appear to be similiar, but I still have a
question as to what the "downline load" mode is.  Does this mode allow the user
to download data into BASIC memory?  If so, how big is the buffer?  And, can
the data be printed to the printer and/or saved to the disk?

		thanks in advance...


-- 
Steve J. Lindahl               {hplabs, seismo}...!hao!udenva!duorion!slindahl

             The Beast is loose, and it's hungry tonight...(Platoon)