Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-unix!hplabs!hpcea!hpsrla!hpsadla!jimh
From: jimh@hpsadla.HP (Jim Horn)
Newsgroups: comp.sys.cbm
Subject: RGB for the C64????
Message-ID: <2790001@hpsadla.HP>
Date: Thu, 22-Jan-87 18:13:58 EST
Article-I.D.: hpsadla.2790001
Posted: Thu Jan 22 18:13:58 1987
Date-Received: Sat, 24-Jan-87 13:43:21 EST
Lines: 25

------------

Hi!

     Does anyone out there know if there is a simple modification to the
C64 to allow access to an RGB type signal?  I assume there's one in there,
and have an RGBI monitor (IBM compatible - oh well..), and am curious as to
whether it would be feasible to hack 'n slash the poor machine to allow use
of a superior non-NTSC (Never Twice the Same Color) display.

     Yes, I know which end of a soldering iron to hold - just a bit of
which pins have what signals should get me going.

     You can send any ideas to the user who asked these questions
originally (and doesn't have access to the net):

	Bill Hiscox  2LR-S	(707) 794-4202
	1212 Valley House Drive
	Rohnert Park, CA  94928-4999

or you can send it to me via E-mail and I'll forward it to him.

     Many thanks in advance!

		Jim Horn	{The World}!hplabs!hpccc!hpsrla!hpsadla!jimh