Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!ima!mirror!rayssd!msf
From: msf@rayssd.UUCP
Newsgroups: comp.sys.cbm
Subject: Changing sequential files to program files
Message-ID: <592@rayssd.RAY.COM>
Date: Mon, 26-Jan-87 12:59:19 EST
Article-I.D.: rayssd.592
Posted: Mon Jan 26 12:59:19 1987
Date-Received: Tue, 27-Jan-87 06:25:08 EST
Sender: msf@rayssd.RAY.COM (Michael S. Frank @ Raytheon Company, Portsmouth RI)
Distribution: na
Organization: Raytheon Company, Portsmouth RI
Lines: 9
Keywords: SEQ -> PRG

Does anyone out there know how I can convert a sequential file (which is how
my terminal program downloads) into a program file (so I can load and run it)
I've tried to look at Track 18/Block 1 etc, but can't seem to get the hang
of it.  Thanks in advance!
-- 
Michael Frank     { allegra, brunix, cci632, gatech ihnp4, } 
                  { linus, uriecl, mirror, purbos, raybed2 }  ...!rayssd!msf
These opinions are mine, Mine MINE! And do not reflect anybody else's opionions.
                              So There.