Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcnc!gatech!cuae2!ihnp4!inuxc!iuvax!bobmon
From: bobmon@iuvax.UUCP (Robert Montante)
Newsgroups: comp.sys.ibm.pc
Subject: Re: fansi-console problems.
Message-ID: <2503@iuvax.UUCP>
Date: Wed, 21-Jan-87 17:39:15 EST
Article-I.D.: iuvax.2503
Posted: Wed Jan 21 17:39:15 1987
Date-Received: Thu, 22-Jan-87 19:46:54 EST
References: <218@uvicctr.UUCP>
Reply-To: bobmon@iuvax.UUCP (Robert Montante)
Organization: Indiana University, Bloomington
Lines: 23

sbanner1@uvicctr.UUCP (S. John Banner) :
>
>   Hello,  I just recently got a copy of Fansi Console V2.0 for my
>PC clone, and when I went to install it, I found that it hangs the
>machine.  [...]
>
>   The system I have is:
>IBS PC  (2floppies, and a 20Meg Hard drive),
>an AST 6pack clone, with full memory expansion installed (640K total),
>Tecmar Graphics Master card (configured as a CGA), with matching
>      monitor,
>NEC V20 CPU.
>
[...]

Well, I doubt that it's the V20, as I'm using Fansi v2.00f on a Zenith with a
V20 right now.  Have you tried the various switches, like /Y=1 or 0 to increase
IBM compatibility?  None of the /X switches mention an IBS, but you might try
one of them (1 thru 6) to see if that matches up. . . . There are some other
keyboard functions, but since I didn't buy the printed manual I don't know how
to do anything with them :-(
	You might try using AUTOEXEC.BAT to call some program that reads the
keyboard, just to get some more symptoms.