Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!rwwetmore
From: rwwetmore@watmath.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Reset switch for IBM PC/AT ?
Message-ID: <4669@watmath.UUCP>
Date: Wed, 28-Jan-87 11:00:34 EST
Article-I.D.: watmath.4669
Posted: Wed Jan 28 11:00:34 1987
Date-Received: Thu, 29-Jan-87 04:44:14 EST
References: <460@ima.UUCP>
Reply-To: rwwetmore@watmath.UUCP (Ross Wetmore [ICR])
Distribution: na
Organization: U. of Waterloo, Ontario
Lines: 14

In article <460@ima.UUCP> johnl@ima.UUCP (John R. Levine) writes:
>It is my impression that it should be fairly easy to
>build a little circuit that when I push a button zaps the reset line inside
>the PC and restarts it as though the power had just been restored. 

 I have a spring loaded push button connected to an on board jumper by
twisted pair wires that I can hit on the back of my AT clone. The jumper
is documented in the motherboard technical sheets. Presumably a similar
jumper exists on yours. Ask your local hardware technicians, maybe.

Ross W. Wetmore			| rwwetmore@water.NetNorth
University of Waterloo		| rwwetmore@math.waterloo.edu
Waterloo, Ontario N2L 3G1	| {clyde, ihnp4, ubc-vision, utcsri}
(519) 885-1211 ext 3491		|   !watmath!rwwetmore