Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!watmath!clyde!rutgers!mit-eddie!bu-cs!bucsb.bu.edu!madd From: madd@bucsb.bu.edu.UUCP Newsgroups: comp.sys.ibm.pc Subject: Re: Park command for IBM PC w/ Seagate Message-ID: <726@bucsb.bu.edu.UUCP> Date: Thu, 5-Feb-87 23:28:43 EST Article-I.D.: bucsb.726 Posted: Thu Feb 5 23:28:43 1987 Date-Received: Sat, 7-Feb-87 17:11:44 EST References: <249@uhmanoa.UUCP> <16800027@clio> Reply-To: madd@bucsb.bu.edu.UUCP (Jim "Jack" Frost) Organization: ODO (Organization for the Disorganization of Organization) Lines: 26 In article <16800027@clio> berger@clio.Uiuc.ARPA writes: > >If it's a relatively new drive, you probably don't want to use a >head parking program. The more recent Seagate drives automatically >retract the head on power-down. The "universal" head parking >programs read your drive parameters and park the head a few tracks >beyond the last track - generally well within the alternate >track section and not on the track left by the manufacturer for >parking the head. Beware! "New" means "recent model" here. A good point to note is that using a head parking program on a drive that has automatic head retraction CANNOT hurt. The heads will still automatically retract. If you think that your drive is automatically parking, then neglect to use a park utility, you could be wrong and lose data. READ YOUR DRIVE SPECS! Unless they specifically state that the head retracts automatically, use a park program. Most drives that do not park come with a utility disk that has a head parker on it, but lack thereof is still not a guarantee that your drive parks by itself. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - Jim Frost * The Madd Hacker - UUCP: ..!harvard!bu-cs!bucsb!madd | ARPANET: madd@bucsb.bu.edu CSNET: madd%bucsb@bu-cs | BITNET: cscc71c@bostonu -------------------------------+---+------------------------------------ "Oh beer, oh beer." -- Me | [=(BEER) <- Bud the Beer (cheers!)