Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!princeton!allegra!mit-eddie!bacchus!husc6!wjh12!lotto
From: lotto@wjh12.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Kermit question
Message-ID: <55@wjh12.UUCP>
Date: Sat, 7-Feb-87 09:39:32 EST
Article-I.D.: wjh12.55
Posted: Sat Feb  7 09:39:32 1987
Date-Received: Sun, 8-Feb-87 07:51:47 EST
Reply-To: lotto@wjh12.UUCP (Jerry Lotto)
Organization: Harvard Univ. Chem. Dept.
Lines: 13


I wanted to use KERMIT to trap serial information coming out of a
device that send CR as the only line delimiter. (Macs fans might
recognize this protocol). At any rate, the person collecting data
wants to see the stuff scrolling and I have not been able to figure
out how to do it. CU20B FTP server (or our gateway) has been down so I
have not been able to snatch sources to figure it out myself yet.

To paraphrase, how do you get KERMIT to echo CR-LF on receipt of CR
only short of hacking sources? No terminal emulation features are
required by this application.

Reply to lotto@harvard.harvard.edu or @lhasa.uucp. Thanks