Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mit-eddie!genrad!decvax!tektronix!reed!iscuva!jimc
From: jimc@iscuva.UUCP (Jim Cathey)
Newsgroups: comp.sys.mac,comp.sys.tandy
Subject: Re: Mac+ to DMP 105 Printer or Other Printers???? HELP!!!!
Message-ID: <437@iscuva.UUCP>
Date: Mon, 19-Jan-87 12:01:13 EST
Article-I.D.: iscuva.437
Posted: Mon Jan 19 12:01:13 1987
Date-Received: Wed, 21-Jan-87 04:26:29 EST
References: <2068@dciem.UUCP> <5571@dartvax.UUCP>
Reply-To: jimc@iscuva.UUCP (Jim Cathey)
Organization: ISC Systems Corporation, Spokane, Wa.
Lines: 17
Xref: mnetor comp.sys.mac:861 comp.sys.tandy:74

In article <5571@dartvax.UUCP> earleh@dartvax.UUCP (Earle R. Horton) writes:
>     The port I use on the DMP 110 operates at 1200 baud, and uses
>a "hardware" (CTS) handshake.  This differs from the standard Mac
>mode, which is 9600 baud and "software" (XON-XOFF) handshake.

The Mac uses hardware handshaking as well, except for the very early 128K Mac
software.  (There was an erratum sheet telling you how to change the DIP
switches in the printer to hardware [from software] handshaking).

+----------------+
! II      CCCCCC !  Jim Cathey
! II  SSSSCC     !  ISC Systems Corp.
! II      CC     !  Spokane, WA
! IISSSS  CC     !  UUCP: ihnp4!tektronix!reed!iscuva!jimc
! II      CCCCCC !  (509)927-5757
+----------------+
			"With excitement like this, who is needing enemas?"