Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!ut-sally!husc6!rutgers!brl-adm!brl-smoke!gwyn From: gwyn@brl-smoke.ARPA (Doug Gwyn ) Newsgroups: comp.terminals Subject: Re: Termcap entry for blit ( dmd 5620 ) Message-ID: <5515@brl-smoke.ARPA> Date: Tue, 13-Jan-87 17:28:17 EST Article-I.D.: brl-smok.5515 Posted: Tue Jan 13 17:28:17 1987 Date-Received: Sat, 17-Jan-87 00:52:02 EST References: <923@uw-nsr.UUCP> <604@briar.UUCP> <5498@brl-smoke.ARPA> <622@briar.UUCP> Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) ) Distribution: na Organization: Ballistic Research Lab (BRL), APG, MD. Lines: 8 Assuming you're still having trouble with flow control after you've set up the modes on your 5620 as specified in the comments at the beginning of the termcap I posted, your problem is very likely that you have an older model 5620 and have not supplied all the correct handshaking signals on its RS-232-C host connector. For reasons unknown to me, flow control doesn't work right under those circumstances (no, it doesn't make any sense!).