Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!seismo!mcnc!ece-csc!ncrcae!ncr-sd!sdcsvax!nosc!humu!uhmanoa!uhccux!todd
From: todd@uhccux.UUCP
Newsgroups: comp.terminals,comp.sys.ibm.pc,comp.unix.questions
Subject: Kermit & curses box function problem
Message-ID: <311@uhccux.UUCP>
Date: Fri, 6-Feb-87 18:52:54 EST
Article-I.D.: uhccux.311
Posted: Fri Feb  6 18:52:54 1987
Date-Received: Sun, 8-Feb-87 05:48:31 EST
Organization: U. of Hawaii, Manoa (Honolulu)
Lines: 27
Keywords: Kermit VT100 H19 curses box
Xref: watmath comp.terminals:173 comp.sys.ibm.pc:1464 comp.unix.questions:956


Does anyone have a fix for the Kermit H19 and VT102 emulation modes?
I've noticed that at least one curses function does not work correctly
with Kermit: box.  I am fairly sure of this because I switched to
the Mark of the Unicorn PC/InterComm VT100 emulator to make sure it
was not some PC flakiness causing the problem.  The curses functions
worked fine using the PC/InterComm emulator.

Given the following conditions:
	Ultrix 1.2 (sort of 4.2bsd) on a VAX 8650
	set term=vt100
	Kermit 2.29 on any kind of PC, AT, or clone
	CGA or EGA display
	C program using curses' box function

The symptoms are:
	Only the top and right edges are displayed
	move'd alphanumerics sometimes appear and sometimes don't
		after a refresh() call.

Thanks....todd

-- 
Todd Ogasawara, U. of Hawaii Computing Center
UUCP:		{ihnp4,seismo,ucbvax,dcdwest}!sdcsvax!nosc!uhccux!todd
ARPA:		uhccux!todd@nosc.ARPA
INTERNET:	todd@UHCC.HAWAII.EDU