Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!brl-adm!adm!mike@BRL.ARPA
From: mike@BRL.ARPA
Newsgroups: comp.unix.wizards
Subject: Re:  dr11w driver
Message-ID: <4111@brl-adm.ARPA>
Date: Thu, 29-Jan-87 22:29:39 EST
Article-I.D.: brl-adm.4111
Posted: Thu Jan 29 22:29:39 1987
Date-Received: Sat, 31-Jan-87 02:14:41 EST
Sender: news@brl-adm.ARPA
Lines: 26

BRL has a high-speed A/D D/A system for digital music interfaced to
a VAX-11/780 via a DR-11B.  We have drivers for both 4.2 and 4.3.
The DAC control specifics will need to be changed, but the skeleton
of the driver could be a real timesaver.  Drop me a line and I'll
E-mail you one (specify 4.2 or 4.3, not that they are much different).

This code was written by Don Merritt, based on a driver that I wrote for
the HEP Low Speed Bus, which I did as a rewrite of a driver for a Vector
General 3300 display, which I wrote from scratch.  It is public domain,
distribution unlimited.

If it maters to anybody, we will be doing a work-alike version of
this driver for our Gould running UTX 2.0 in the near future,
for the Gould ``DR-11'' interface board.
Best,
 -Mike Muuss

ArpaNet:  <Mike @ BRL.ARPA>
UUCP:     decvax!brl-smoke!mike
Postal:
  Mike Muuss
  Leader, Advanced Computer Systems Team
  Systems Engineering and Concepts Analysis Division
  U.S. Army Ballistic Research Laboratory
  Attn: SLCBR-SECAD (Muuss)
  APG, MD  21005-5066