Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!ucbvax!NUHUB.ACS.NORTHEASTERN.EDU!JOHNSON
From: JOHNSON@NUHUB.ACS.NORTHEASTERN.EDU.UUCP
Newsgroups: mod.computers.vax
Subject: NRC software, MICOM NI1010A tcp/ip boards & VAXes running VMS
Message-ID: <8701162131.AA17885@ucbvax.Berkeley.EDU>
Date: Thu, 15-Jan-87 16:01:00 EST
Article-I.D.: ucbvax.8701162131.AA17885
Posted: Thu Jan 15 16:01:00 1987
Date-Received: Sat, 17-Jan-87 01:47:45 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 17
Approved: info-vax@sri-kl.arpa


     Hi!

     Anybody heard anything good/bad/indifferent about NRC software 
running a MICOM NI1010A TCP/IP UNIBUS board on a VAX 8650 under VMS 4.4 
or higher?  Any info useful and I'll summarize for the list.  I specify
8650 'cause UNIBUS boards that work just wonderfully on other UNIBUSes
have been known not to work on 8650s.  However, I'm not finicky.  I'll
take anything I can get.  Especially  horrors stories but I need the 
good newws too.

Chris Johnson
Northeastern University

csnet:      johnson@nuhub.acs.northeastern.edu
arpa:       johnson%nuhub.acs.northeastern.edu@relay.cs.net
at&t:       (617) 437-2335