Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!ucbcad!ucbvax!NUHUB.ACS.NORTHEASTERN.EDU!JOHNSON
From: JOHNSON@NUHUB.ACS.NORTHEASTERN.EDU ("I am only an egg.")
Newsgroups: mod.computers.vax
Subject: NRC software, MICOM NI1010A tcp/ip boards & VAXes running VMS 4.4
Message-ID: <8701180604.AA20651@ucbvax.Berkeley.EDU>
Date: Fri, 16-Jan-87 12:22:00 EST
Article-I.D.: ucbvax.8701180604.AA20651
Posted: Fri Jan 16 12:22:00 1987
Date-Received: Sun, 18-Jan-87 07:39:21 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 19
Approved: info-vax@sri-kl.arpa


       Hi!
  
       Anybody heard anything good/bad/indifferent about NRC software 
  running a MICOM NI1010A TCP/IP UNIBUS board on a VAX 8650 under VMS 4.4 
  or higher?  Any info useful and I'll summarize for the list.  I specify
  8650 'cause UNIBUS boards that work just wonderfully on other UNIBUSes
  have been known not to work on 8650s.  However, I'm not finicky.  I'll
  take anything I can get.  Especially  horrors stories but I need the 
  good newws too.
  
  Chris Johnson
  Northeastern University
  
  csnet:      johnson@nuhub.acs.northeastern.edu
  arpa:       johnson%nuhub.acs.northeastern.edu@relay.cs.net
  at&t:       (617) 437-2335

End of returned message