Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!ames!ucbcad!ucbvax!necntc.NEC.COM!jeff
From: jeff@necntc.NEC.COM (Jeff Janock [sys])
Newsgroups: mod.computers.vax
Subject: Re: psi log file problem
Message-ID: <8701201553.AA08423@necntc.NEC.COM>
Date: Tue, 20-Jan-87 10:53:21 EST
Article-I.D.: necntc.8701201553.AA08423
Posted: Tue Jan 20 10:53:21 1987
Date-Received: Wed, 21-Jan-87 01:54:38 EST
References: <18*macmillan@wnre.aecl.cdn>
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: jeff%necntc.UUCP@talcott.HARVARD.EDU (Jeff Janock [sys])
Organization: NEC Electronics Inc.  Natick, MA 01760
Lines: 38
Approved: info-vax@sri-kl.arpa

In article <18*macmillan@wnre.aecl.cdn> macmillan%wnre.aecl.cdn%ubc.CSNET@RELAY.CS.NET (John MacMillan) writes:
>When capturing data from the public data network, the LOG file
>picks up characters that appear as "R>" when the file is typed
>out afterwards. In a dump, these correspond to hex "00523E".
>
>Does anyone know what causes them, and how to get rid of them?
>(Short of writing a filter program to remove them afterwards.)
>
>John MacMillan
>Atomic Energy of Canada
>Whiteshell Nuclear Research Establishment
>Pinawa, Manitoba, Canada R0E 1L0
>
>(204) 753-2311 x2539


There is an easy way:

PSI> set log/nostamp=all

this will stop psi from putting in the send/rec packet marks...

Hope this helps,


Jeff Janock
NEC Electronics Inc.
One Natick Executive Park
Natick, Massachusetts 01760
+1 617 655 8833

ARPA:               jeff%necntc.UUCP@harvisr.harvard.edu
within UUCP domain: jeff@necntc.NEC.COM
should work:        jeff@necntc.UUCP

or if need be:
{decvax | pyramid | husc6 | seismo!mirror | talcott}!necntc!jeff
gatech!gt-eedsp!necntc!jeff