Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!ucbvax!SIMVAX.BITNET!DAVIDLI
From: DAVIDLI@SIMVAX.BITNET.UUCP
Newsgroups: mod.computers.vax
Subject: User Authorization Failure
Message-ID: <8701211930.AA29803@ucbvax.Berkeley.EDU>
Date: Wed, 21-Jan-87 11:34:00 EST
Article-I.D.: ucbvax.8701211930.AA29803
Posted: Wed Jan 21 11:34:00 1987
Date-Received: Wed, 21-Jan-87 21:36:17 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 22
Approved: info-vax@sri-kl.arpa


I have a MicroVAX II (system 5) with MicroVMS 4.4, a DHV11, an LA210 on
TXA0 (first port on DHV11), and a DEQNA linked to a VAX 11/750 via DECnet.

Any terminal I tie to the DHV11 cannot access the system.  I get a
'User Authorization Failure' message on the terminal.  Even after 12 hours
when NOBODY was using the terminal following a system reboot.

Questions:
        How can I make these terminal ports useful?
        Can I disable the stupid security feature that is causing the
                failure message?
        What avenues of investigation do you recommend?

BTW:  the ports are set up:  /dev=vt100/speed=9600/perm, except for TXA0,
which is set up as a terminal printer port.

Thanks for any help you can give in this matter!

                                        Dave Meile

BITNET: davidli@simvax