Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!inuxc!iuvax!ndmath!thelink!andy
From: andy@thelink.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: Hayes command set oversight/problem
Message-ID: <96@thelink.UUCP>
Date: Sat, 14-Feb-87 18:36:35 EST
Article-I.D.: thelink.96
Posted: Sat Feb 14 18:36:35 1987
Date-Received: Sun, 15-Feb-87 22:38:21 EST
References: <1144@sri-unix.ARPA>
Organization: The Link, South Bend, IN
Lines: 7

Will a Hayes modem that uses "-" as the escape character go into
command mode when you are running readnews or anything else that
outputs a line of "-"'s?  No.  There is a command character guard
time built-in.  There must be at least one second before and one
second after the three escape characters for the command to be
recognized, although this can be tweaked by changing register S12,
where the value can be set in 50ths of a second.