Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!ames!amdahl!meccts!viper!john
From: john@viper.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: Hayes command set oversight/problem
Message-ID: <533@viper.UUCP>
Date: Sun, 15-Feb-87 12:41:33 EST
Article-I.D.: viper.533
Posted: Sun Feb 15 12:41:33 1987
Date-Received: Mon, 16-Feb-87 03:47:45 EST
References: <871@basser.oz> <1408@cbmvax.cbmvax.cbm.UUCP>
Reply-To: john@viper.UUCP (John Stanley)
Organization: DynaSoft Systems
Lines: 11

In <1408@cbmvax.cbmvax.cbm.UUCP> grr@cbmvax.UUCP (George Robbins) writes:
...........................
 >
 >Hayes modems HANG-UP when you type the +++ sequence.
 
  Nonsense!  When I type +++, the Hayes modems I've used drop back into
modem-command mode.  You can then change baud rates, parity or any of the
other parameters and return to your online session.  There -may- be a
flag (settable by switch) that will drop carrier when you enter command
mode, but don't automaticly assume that just because your system works that
way that it's the one-and-only "Hayes" compatabile mode...