Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!lll-lcc!ames!ucbcad!ucbvax!hplabs!sdcrdcf!burdvax!psuvax1!ehrlich
From: ehrlich@psuvax1.UUCP
Newsgroups: comp.dcom.modems
Subject: Packard-Bell SmartModem 2400
Message-ID: <2427@psuvax1.UUCP>
Date: Mon, 16-Feb-87 17:05:33 EST
Article-I.D.: psuvax1.2427
Posted: Mon Feb 16 17:05:33 1987
Date-Received: Tue, 17-Feb-87 22:47:25 EST
Reply-To: ehrlich@psuvax1.UUCP (Dan Ehrlich)
Organization: Pennsylvania State Univ.
Lines: 23
Keywords: Packard-Bell, V.22, V.22bis

We have a Packard-Bell SmartModem 2400 that we would like to use to provide
2400 baud v.22bis access into psuvax1 for USENET.  The modem seems to have
a problem in that if a site calls up using 1200 baud v.22 it will corretly
detect this and switch from 2400 to 1200 baud.  Unfourtunately it does not
appear to go the other way.  If the modem is in 1200 baud v.22 mode it does
not recognize the 2400 baud v.22bis carrier.  We would like to make this
generally available but I have not been able to figure out a fix.

Has anyone else seen this problem with the SmartModem 2400?  Does anyone
know of a way to get around this problem (power cycling the modem works
but... :-) )?  Any help or suggestions would be appreciated.  Thanks
in advance.

--Daniel Ehrlich
UUCP:     {burdvax,cbosgd,cmcl2,pitt,ihnp4}!psuvax1!ehrlich
CSNET:    ehrlich@penn-state.csnet  USPS: The Pennsylvania State University
INTERNET: ehrlich@psuvax1.psu.edu         Department of Computer Science
BITNET:   ehrlich@psuvax1.bitnet          333 Whitmore Laboratory
BELL:     +1 814 863 1142                 University Park, PA   16802
Quote: "The sky is blue so we know where to stop mowing."  Judge Harold T. Stone
Disclaimer: The opinions expressed herein are my own and do not reflect the
            opinions, or policies, of The Pennsylvania State University or the
            Department of Computer Science.