Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!lll-lcc!seismo!nbires!isis!scicom!cyrill
From: cyrill@scicom.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: Hayes command set oversight/problem
Message-ID: <767@scicom.AlphaCDC.COM>
Date: Mon, 16-Feb-87 13:35:37 EST
Article-I.D.: scicom.767
Posted: Mon Feb 16 13:35:37 1987
Date-Received: Wed, 18-Feb-87 05:39:39 EST
References: <871@basser.oz> <1408@cbmvax.cbmvax.cbm.UUCP> <3096@gitpyr.gatech.EDU>
Reply-To: cyrill@scicom.UUCP (Cyro Lord)
Organization: Alpha Communications Development Corp.
Lines: 7

About the '+++' command, it can be disable on any Hayes type modem
by changing the 's' register which controls what is the escape
characters to above ascii 127. I don't know what this is for Hayes
itself, but on US Robotics 300 or 300/1200 or 300/1200/2400, CTS
Datacomm 2424 ADH 300/1200/2400 this register is 's2'. Most times,
you would want to set this register to 's2=250' (just a number) for
any port that is incoming/outgoing in a non manual mode.