Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!ptsfa!lll-lcc!seismo!mcvax!cernvax!ethz!peter
From: peter@ethz.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: Hayes command set oversight/problem
Message-ID: <29@ethz.UUCP>
Date: Sun, 1-Mar-87 16:15:34 EST
Article-I.D.: ethz.29
Posted: Sun Mar  1 16:15:34 1987
Date-Received: Wed, 4-Mar-87 18:41:31 EST
References: <871@basser.oz> <1408@cbmvax.cbmvax.cbm.UUCP> <3096@gitpyr.gatech.EDU>
Reply-To: peter@ethz.UUCP (Peter Beadle)
Organization: CS Department, ETH Zuerich, Switzerland
Lines: 29

In article <3096@gitpyr.gatech.EDU> robert@gitpyr.UUCP (Robert Viduya) writes:
>>grr@cbmvax.UUCP (George Robbins) (grr@cbmvax.UUCP, <1408@cbmvax.cbmvax.cbm.UUCP>):
>> Your modem is not "hayes compatible" in this mode!  Hayes modems HANG-UP
>> when you type the +++ sequence.
>
>Hayes modems do NOT hang up when the +++ sequence is typed.  I just
>tried it on my Hayes 1200.  It said "OK" and I typed "ATD" and I was
>right back where I was before typing the +++ (reading news).  No
>dial tone, no touch tones, just a "CONNECT".
>
>			robert
>-- 
>Robert Viduya					     robert@pyr.ocs.gatech.edu
>Office of Computing Services					(404) 894-4660
>Georgia Institute of Technology
>Atlanta, Georgia	30332

I just tried the same +++ sequence with an inscrutable Hong Kong copy
which will remain nameless (it doesn't have one) and as Robert remarked I was
right back where I started reading news.

Actually it's a Modem-phone WD-1800 which claims to do ccitt and bell 1200 baud
doubles as a telephone and works quiet well accept when it gets real hot and starts
generating it's own line noise.

I suppose there's Hayes comatability and Hayes compatability.

Peter
seismo!mcvax!cernvax!ethz!peter