Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!mit-eddie!uw-beaver!tektronix!cae780!leadsv!trimble
From: trimble@leadsv.UUCP (Gary Trimble)
Newsgroups: comp.misc
Subject: Computer Controlled Engravers
Message-ID: <1361@leadsv.UUCP>
Date: Thu, 5-Mar-87 19:26:30 EST
Article-I.D.: leadsv.1361
Posted: Thu Mar  5 19:26:30 1987
Date-Received: Sun, 8-Mar-87 02:46:19 EST
Organization: LMSC-LEADS, Sunnyvale, Ca.
Lines: 15
Keywords: Controllers, Engraving

(Take that, dreaded line eater)

I'm looking for some info on anyone's experiences with computer
comtrolled engraving equipments (preferrably engraving units
interfaces to "standard" pcs (i.e. apple, IBM, etc). I'll summarize
responses to the net if interest is shown.

Gary M. Trimble - Lockheed Advanced Marine Systems
UUCP: {(ucbvax!dual!sun) (ihnp4!qubix)}!sunncal!leadsv!trimble
      {{allegra ihnp4 dual}!fortune!decvax!decwrl}!amdcad!cae780!leadsv!trimble

-- 
Gary M. Trimble - Lockheed Advanced Marine Systems
UUCP: {(ucbvax!dual!sun) (ihnp4!qubix)}!sunncal!leadsv!trimble
      {{allegra ihnp4 dual}!fortune!decvax!decwrl}!amdcad!cae780!leadsv!trimble