Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watcgl!fdfishman
From: fdfishman@watcgl.UUCP
Newsgroups: comp.sys.amiga
Subject: Schematic Design and Testing Software for the Amiga
Message-ID: <610@watcgl.UUCP>
Date: Wed, 18-Feb-87 18:32:56 EST
Article-I.D.: watcgl.610
Posted: Wed Feb 18 18:32:56 1987
Date-Received: Thu, 19-Feb-87 03:36:59 EST
Distribution: comp
Organization: U of Waterloo, Ontario
Lines: 41
Keywords: Design and Testing Software, Amiga

Hi,
 I am looking for some schematic capture/simulation software for a friend.
 I personally know of no software, but I am including his request.
     
            Can you advise me if there is any schematic capture with simulation
          software available for the Amiga? The simulation would ideally permit
          the generation of timing diagram displays as well as state table
          output.
     
            The schematic capture stuff is the computer supported generation
          of hardware schematics.  This permits the designer to "define"
          a digital circuit. The simulation stuff permits that design to
          be tried in theory before the prototype is actually constructed.
          This is another example of CAD/CAM. The PCLO program is layout
          of the design on the board after successful prototyping. It is
          one step beyond the stage I'm interested in.

          I Have found one item of interest, see page 46 of the Jan.
	  '87 Byte, the Logicworks program for the Mac.
     
                                                 Thanks,
                                                  Robert Henderson.

You can e-mail me all comments and I will summarize the results to the net
if there is enough interest.

Thanks

      FDFISHMAN (Flynn D. Fishman) @ WATCGL

UUCP  :	...!{decvax|ihnp4|clyde|allegra|utzoo}!watmath!watcgl!fdfishman   
ARPA  :	fdfishman%watcgl%waterloo.csnet@csnet-relay.arpa 
CSNET :	fdfishman%watcgl@waterloo.csnet
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This Cutsie saying space left intentionally left blank until such a time as
   1) The above mentioned user can think of a cutsie saying
   2) The above mentioned user with the aid of some friends can think of a 
      cutsie saying.
or 3) Sufficient time has passed such that plagerism of someone else's cutsie
      saying would not be noticed by many.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=