Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!cbmvax!carolyn
From: carolyn@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: Printer HELP Needed
Message-ID: <1468@cbmvax.cbmvax.cbm.UUCP>
Date: Thu, 26-Feb-87 10:17:47 EST
Article-I.D.: cbmvax.1468
Posted: Thu Feb 26 10:17:47 1987
Date-Received: Sat, 28-Feb-87 04:24:10 EST
References: <26700007@ccvaxa>
Reply-To: carolyn@cbmvax.UUCP (Carolyn Scheppner CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 38

In article <26700007@ccvaxa> pstryjew@ccvaxa.UUCP writes:
>
>I am trying to connect an Apple Imagewriter II to my Amiga, but I cannot get    anything to print.  I am using Kickstart and WB vers1.2, and have tried all
>ombinations of baudrates and handshaking.  I have had the printer type set
>in preferences to Imagewriter II and generic and tried combinations of the 
>other variables.  I have had a modem hooked to the serial port and it works
>fine.  

I buzzed a cable that QA had used with the ImageWriter II.  I don't
know what their prefs setup was, but their cable is as follows:

I made up my own numbering scheme for the Apple connector since there
were no numbers on it.  These pictures show the 2 ends of the cable.

   Amiga End                 Apple End
________________            
\1...........13/               1 2 3
 \14........25/               4  5  6
  \__________/                  7 8

Connections
AMIGA <-> APPLE
  7         1
 nc         2
 nc         3
  3         4
  7         5
  2         6
  5         7
  4         8

carolyn
-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Scheppner -- CBM   >>Amiga Technical Support<<
                     UUCP  ...{allegra,caip,ihnp4,seismo}!cbmvax!carolyn 
                     PHONE 215-431-9180
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=