Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!ptsfa!lll-lcc!ames!ucbcad!ucbvax!sdcsvax!ucsdhub!hp-sdd!artecon!tony
From: tony@artecon.UUCP
Newsgroups: comp.sys.amiga
Subject: Got the track-40 blues.
Message-ID: <372@artecon.artecon.UUCP>
Date: Mon, 2-Mar-87 14:48:27 EST
Article-I.D.: artecon.372
Posted: Mon Mar  2 14:48:27 1987
Date-Received: Wed, 4-Mar-87 20:02:56 EST
Organization: Artecon Inc., San Diego
Lines: 35
Keywords: HELP!!!


Ok, now I'm getting track #40 trashed.  What I have running is:

memclock  ( should not be a problem )
lav       ( another shouldnt be a problem, however, it needed a larger stack
		than the default)
Matt's shell (Latest version, it reports V2.03 22Oct86, but Matt said something
		about forgetting to change it to 2.04?)

ray  (as in DBW_render, running in its own window)

    The symptom is that I run 'ray' in its own window, and let the
shell remain idle, several hours later, a requestor reports a read/write
error, and diskdoctor reports a trashed track #40.

    I am running with 1.2 workbench with stack set to 20000.

    I remember that somepeople have had this problem with the 'M' versions
of the shell, but I am not using one of the 'M' versions, just the normal
version.

Any ideas or suggestions??

Also, I am having one other interesting interaction between the shell
and AmigaMon.  If run mon then check the open files, no problem, then
I get back to the shell, do a dev on the disk, then run mon again,
do an open files check, then it gurus.  (I think the number was
000...003.0000A17 (unfortunately, I left the number at home.)


-- 
**************** Insert 'Standard' Disclaimer here:  OOP ACK! *****************
*  Tony Parkhurst -- {hplabs|sdcsvax|ncr-sd|hpfcla|ihnp4}!hp-sdd!artecon!adp  *
*                -OR-      hp-sdd!artecon!adp@nosc.ARPA                       *
*******************************************************************************