Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!daemon
From: daemon@rutgers.UUCP
Newsgroups: comp.sys.amiga
Subject: 1Meg Squeeze-Ram 19.95 without RAM
Message-ID: <1143@rutgers.RUTGERS.EDU>
Date: Wed, 11-Mar-87 10:56:41 EST
Article-I.D.: rutgers.1143
Posted: Wed Mar 11 10:56:41 1987
Date-Received: Thu, 12-Mar-87 23:31:24 EST
Sender: daemon@rutgers.RUTGERS.EDU
Lines: 36

From: Thomka.OsbuSouth@Xerox.COM


Just ordered a new RAM addition for my Amiga.  I am not connected to
this company in ANY way. just wanted to share the info.

It is called Squeeze-Ram, made by:
Aminetics
P.O. Box 982-205
Whittier, CA;  90608
(213) 698-6170, talk to Chris Irving

The benefits for this memory are:
The 1Mb is internal to the Amiga case (now have a 1.5Mb Amiga);
Uses the Amiga power (which is more than adequate);
Doesn't interfere with any other memory or hardware (mem addr is 0Cxxxxx
range)
   (same as used in the memory of the A2000);
Fits BETWEEN the KickRam daughter board and the motherboard;
No additional fly-wires used, picks up all connections by just being
plugged in;
No hacking of your Amiga (no trace cutting, no soldering to it, etc);
It is auto-configuring;
Installation is less than 30 minutes (if you're very slow);
Price without the RAM is $119.95

disadvantages:
It is sold as a kit, without the RAM.

BUT!
But other parts are supplied.  It will take about 3-4 hours in putting
it together.  All the chips are installed on sockets so there is less
chance of your burning up a chip.

 
	Chuck