Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!seismo!sundc!potomac!dolqci!gmu90x!sanchez
From: sanchez@gmu90x.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: Jitter-Rid
Message-ID: <194@gmu90x.UUCP>
Date: Mon, 2-Mar-87 09:49:18 EST
Article-I.D.: gmu90x.194
Posted: Mon Mar  2 09:49:18 1987
Date-Received: Fri, 13-Mar-87 20:39:30 EST
References: <1870@cit-vax.Caltech.Edu>
Distribution: na
Organization: George Mason University, Fairfax, VA
Lines: 8
Keywords: jitter rid interlace flicker ideas created
Summary: Velcro is not strong enough

If you are using a Jitter-Rid, the velcro that is supplied is not
strong enough to hold it to the amiga.  I complained to Ideas-Created, the
supplier, and was supplied with a longer strip of velcro and a short
letter saying that any having that problem could write to
ideas-created and send them $1 to get the longer velcro strips.  In my
opinion, you can go to ace hardware and get velcro cheaper/easier.
They asked me to post this for them so here it is.
Jim Sanchez