Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!cbmvax!grr
From: grr@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: Early A2000's ... will they be different?
Message-ID: <1544@cbmvax.cbmvax.cbm.UUCP>
Date: Thu, 12-Mar-87 12:21:24 EST
Article-I.D.: cbmvax.1544
Posted: Thu Mar 12 12:21:24 1987
Date-Received: Fri, 13-Mar-87 20:55:26 EST
References: <5800@amdahl.UUCP> <1426@cadovax.UUCP>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Organization: Commodore Technology, West Chester, PA
Lines: 18
Keywords: westchester german 2000 revisions video slot differences

In article <1426@cadovax.UUCP> keithd@cadovax.UUCP (PUT YOUR NAME HERE) writes:
>
>Another thing that may have an impact on genlock, did anyone spot room
>for one in the Byte picture of the A2000?  It would seem that genlock for
>the A2000 goes INSIDE the box, unlike where it goes in the A1000.  This
>means when you upgrade from an A1000 w/genlock to an A2000 w/genlock, you
>probably have to buy a new genlock, among other things.

Well, if you already have a genlock and you are a clever person, then you can
make a cable connect the genlock to the video connector, which hasn't changed.

The A2000 has a little slot over on the right hand side that has the video
signals available.  We will offer an internal genlock board to go there, and
also hope to see some third party advanced video/audio stuff.
-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|rutgers}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)