Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!cdfc.utoronto!a228arig
From: a228arig@cdfc.utoronto.UUCP
Newsgroups: comp.sys.apple
Subject: Joystick pinouts.
Message-ID: <8702152306.AA13704@cdfc.toronto.edu>
Date: Sun, 15-Feb-87 18:06:29 EST
Article-I.D.: cdfc.8702152306.AA13704
Posted: Sun Feb 15 18:06:29 1987
Date-Received: Wed, 18-Feb-87 22:41:40 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 28


 
Here are the connections that you will need to convert a //e or //c joystick
for use in a //+, or vice versa.
 
16 pin DIP (Apple //+)     connection           DB-9 (//e, //c...)
 
        1                       +5v                     2
        2                       PB0                     7
        3                       PB1                     1
        6                       GC0                     5
        8                       GND                     3
       10                       GC1                     6
 
For joystick purposes, you can leave all the other ones unconnected.
 
I hope this helps!
 
--Tak Ariga
 
-----------------------------------------------------------------------------
UUCP:     {utzoo, decvax, ihnp4, cbosgd, utcsri, mnetor}!utcs!utcdfa!a228arig
ARPAnet:  a228arig%cdfa.toronto.edu@relay.cs.net
CSnet:    a228arig%cdfa.toronto.edu
BITNET:   utoronto%"a228arig@cdfa.utoronto"     (<- with some luck)
==  University of Toronto -- Toronto, Canada  ==
-----------------------------------------------------------------------------