Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!ames!ucbcad!ucbvax!decvax!decwrl!hplabs!sdcrdcf!trwrb!sansom
From: sansom@trwrb.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Time/Date Setting Question
Message-ID: <1603@trwrb.UUCP>
Date: Fri, 20-Feb-87 10:55:40 EST
Article-I.D.: trwrb.1603
Posted: Fri Feb 20 10:55:40 1987
Date-Received: Sat, 21-Feb-87 16:38:57 EST
References: <6308@mhuxu.UUCP>
Reply-To: sansom@trwrb.UUCP (Richard Sansom)
Organization: TRW EDS, Redondo Beach, CA
Lines: 19

In article <6308@mhuxu.UUCP> cbz@mhuxu.UUCP writes:
>I have tried running DATE.PRG, CLOCK.PRG and SETTIME.PRG from an AUTO
>folder in an effort to set the correct time and date at boot-up...

The control panel clock (for some reason) is not updated very often (maybe
every minute or so).  Check the control panel several minutes after you boot
with one of the above mentioned programs and see if it shows the correct time
and date.  If it doesn't, then you are probably using an old version of the
control panel.  I think the new one is available from Atari's BB (or drop
me a line and I'll mail it to you).

-Rich
-- 
 __________ ______ ____ _____ ___
/_________//___   ||__|/____|/__/   Richard E. Sansom
   ___    ____/  / ____________     TRW Electronics & Defense Sector
  /  /   /  /\  <  |    /|    /     One Space Park Drive, R3/1028
 /  /   /  /  \  \ |   / |   /      Redondo Beach, CA 90278
/__/   /__/    \__\|__/  |__/       ...{decvax,ucbvax,ihnp4}!trwrb!sansom