Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!seismo!ut-sally!utah-cs!atwell
From: atwell@utah-cs.UUCP
Newsgroups: comp.sys.atari.st
Subject: RIP
Message-ID: <4316@utah-cs.UUCP>
Date: Sun, 22-Feb-87 16:14:06 EST
Article-I.D.: utah-cs.4316
Posted: Sun Feb 22 16:14:06 1987
Date-Received: Mon, 23-Feb-87 03:13:13 EST
Organization: University of Utah CS Dept
Lines: 15
Keywords: Rev A board

My ST died today and before I get it fixed, I was wondering if someone
could verify a rumor I have heard.  Is Atari offering a $95 replacement 
for Rev A motherboards?  If so, why?  Is there something inherently wrong
with a Rev A board?

As far as my ST dying goes, I had left it on with NITE (screen saver) 
installed and when I returned to the machine, it was dead:  the power
light was on but I couldn't get it to display to the screen or to boot
(neither cold nor warm boot worked).

Bart

PS.  Thanks to all who responded to my jittery monitor problem.  I've got 
a couple more power supplies to move before I can be sure that the monitor
is broken.  Maybe I can check once my machine is repaired.