Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!inuxc!pur-ee!j.cc.purdue.edu!h.cc.purdue.edu!pur-phy!piner
From: piner@pur-phy.UUCP
Newsgroups: comp.misc,comp.sys.m68k,comp.sys.atari.st
Subject: A/D & Graphics hardware query
Message-ID: <2146@pur-phy.UUCP>
Date: Mon, 23-Feb-87 03:38:14 EST
Article-I.D.: pur-phy.2146
Posted: Mon Feb 23 03:38:14 1987
Date-Received: Fri, 27-Feb-87 20:57:26 EST
Distribution: na
Organization: Purdue Univ. Physics Dept., IN
Lines: 17
Xref: utgpu comp.misc:284 comp.sys.m68k:261 comp.sys.atari.st:1723


  I turn to the net for advice. I am starting a new project which
requires data acquisition and display. I need an A/D converter,
at least 12 bits, 16 is better.  A D/A converter, 12 bits.
And a high resolution color graphics display, 600x480 minimum,
1024x1024 would be better. I have found a number of products which
meet the minimum requirements, but they all are for IBM PC clones.
I would much rather build this system based on an OS-9/68000 system
or a 68020. So I would like to get suggestions from anyone who knows
of A/D or high res. graphics boards for 68000 based systems. I am not
committed to any bus at this time, so VME, S-50, anything will do.
If I can find the cards, I will buy the computer to match.
Also, while I'm at it, anyone know of a 12 or 16 bit A/D for
the Atari ST? Thanks in advance for any pointers or helpful hints.

				Richard Piner
				piner@galileo.physics.purdue.edu.UUCP