Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!ptsfa!lll-lcc!ames!cit-vax!ll-xn!mit-eddie!uw-beaver!tikal!transys!baron
From: baron@transys.UUCP
Newsgroups: comp.sys.atari.st
Subject: Saving to ram disk (was: Saving the desktop )
Message-ID: <313@transys.UUCP>
Date: Fri, 27-Feb-87 20:31:26 EST
Article-I.D.: transys.313
Posted: Fri Feb 27 20:31:26 1987
Date-Received: Thu, 5-Mar-87 18:39:46 EST
Reply-To: baron@transys.UUCP (Joe Portman)
Organization: TransSystems Inc. Bellevue, WA
Lines: 20

>In article <432@maccs.UUCP> gordan@maccs.UUCP (Gordan Palameta) writes:
>>I believe part of the original problem might be due to using C as the
>>RAM disk identifier.  I have heard on good authority that C is reserved
>>(to the cartridge port?), and that therefore you should never use C (or
>>A or B, obviously) for a RAM disk...

	On a related matter, when I boot a program from a ram disk, why
	can't the program see my floppy anymore? Is this normal? If thiss
	is a stupid question please forgive me, I've only had my ST a
	couple of weeks.


-- 
These are my own opinions, not those of my employer (self), 
or any one connected with the company (mine) 
Joe Portman (SA)                                USPS: TransSystems Incorporated
AT&T: 1-206-453-5560                                  1280 116th Avenue NE
              /-- uw-beaver!\         /-- camco!  \   Bellevue WA 98009
... ihnp4! --<               >-tikal!<             >-- transys!root
              \-- microsoft!/         \-- teldata!/