Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!mit-eddie!uw-beaver!tektronix!cae780!amdcad!sun!imagen!turner
From: turner@imagen.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Adding another Hard Drive??
Message-ID: <974@imagen.UUCP>
Date: Fri, 13-Mar-87 13:01:35 EST
Article-I.D.: imagen.974
Posted: Fri Mar 13 13:01:35 1987
Date-Received: Sat, 14-Mar-87 19:48:29 EST
References: <901@chinet.UUCP>
Organization: The Houses of the Holy
Lines: 30

in article <901@chinet.UUCP>, cabbie@chinet.UUCP (Richard Andrews) says:
+---------------------------------------------------------
+ 
+ 
+ I dove into a Atari hard drive last night and started with my usual play
+ tactics.  It seems that the Adaptek controller will support 2 hard disk
+ drives.  The current software does not want to see the second drive. 
+ (No, I didn't really expect it to.) (:>)  Is there a patch that I can do
+ to the handler to enable the second drive?  Neil?? Alex??  It would be neat
+ to add a second drive and power supply and have more storage! 
+ 
+  
+ -- 
+---------------------------------------------------------
i have a BMS (Berekely MicroSystems) driver and it supports 2 drives
(in my case a 10 and a 20Mbyte). I believe the driver will run
without their board. Their number is:

(415) 530-3436

there is an extensive article on the BMS system in the current copy
of STapplications

I am in no way associated etc......

-- 
---------------
C'est la vie, C'est la guerre, C'est la pomme de terre
Mail:	Imagen Corp. 2650 San Tomas Expressway Santa Clara, CA 95052-8101 
UUCP:	...{decvax,ucbvax}!decwrl!imagen!turner      AT&T: (408) 986-9400