Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!inuxc!inuxd!goose
From: goose@inuxd.UUCP
Newsgroups: comp.sys.att
Subject: 6300/6300+ running pcdos3.2 and clock/date
Message-ID: <1003@inuxd.UUCP>
Date: Tue, 24-Feb-87 07:46:37 EST
Article-I.D.: inuxd.1003
Posted: Tue Feb 24 07:46:37 1987
Date-Received: Fri, 27-Feb-87 22:56:16 EST
Distribution: net
Organization: AT&T Consumer Products, Indianapolis
Lines: 25

*** REPLACE THIS LINE WITH YOUR MESSAGE ***
I am running PC-DOS3.2 on both an AT&T 6300 and an AT&T 6300+.
I have the following in my autoexec.bat file:

	...
	pcdosclk
	time
	date
	at&ttime set
	...

The program 'pcdosclk' reads the time from the clock chip into pc-dos3.2
and 'at&ttime set' writes the time in pc-dos3.2 to the clock chip.

This sequence works on the 6300 but not completely on the 6300+.
On the 6300+ the date always comes up as 1-1-year (I don't remember what
the year is).

I would appreciate any help you can give to eliminate this problem.
If there are other time/date programs to solve this problem please
indicate where I can get them.

				Thank you,
				Todd Goosman
				ihnp4!inuxc!inuxd!goose