Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!gatech!gitpyr!jkg
From: jkg@gitpyr.UUCP
Newsgroups: comp.sys.att
Subject: Re: ATT 6300 clock
Message-ID: <3158@gitpyr.gatech.EDU>
Date: Sat, 28-Feb-87 23:37:39 EST
Article-I.D.: gitpyr.3158
Posted: Sat Feb 28 23:37:39 1987
Date-Received: Sun, 1-Mar-87 17:14:31 EST
References: <389@neoucom.UUCP>
Reply-To: jkg@gitpyr.UUCP (Jim Greenlee)
Organization: Georgia Institute of Technology
Lines: 16
Keywords: How do you read it?

In article <389@neoucom.UUCP> wtm@neoucom.UUCP (Bill Mayhew) writes:
>I boot.  I'm thinking about changing over to a
>96 TPI drive, and want DOS 3.2 for DRIVER.SYS.

I don't have any information about reading the clock, but I would be
interested in a summary of your efforts if you decide to go with the 
96 TPI drive. I'm considering doing the same thing. Anybody out there
done this? Was it worth the effort? Any and all comments/advice are/is
welcome.

						Jim Greenlee
-- 
The Shadow...!{akgua,allegra,amd,hplabs,ihnp4,seismo,ut-ngp}!gatech!gitpyr!jkg

Jryy, abj lbh'ir tbar naq qbar vg! Whfg unq gb xrrc svqqyvat jvgu vg hagvy lbh
oebxr vg, qvqa'g lbh?!