Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ll-xn!mit-eddie!husc6!necntc!encore!paradis
From: paradis@encore.UUCP (Jim Paradis)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Program accessibility (was Re: "pr" for dos)
Message-ID: <1127@encore.UUCP>
Date: Fri, 6-Mar-87 10:56:42 EST
Article-I.D.: encore.1127
Posted: Fri Mar  6 10:56:42 1987
Date-Received: Sun, 8-Mar-87 06:19:11 EST
References: <286@micropro.UUCP| <1108@uwmacc.UUCP> <144@tdi2.UUCP> <121@homxc.UUCP> <70@excalibur.UUCP>
Reply-To: paradis@encore.UUCP (Jim Paradis)
Organization: Encore Computer Corp., Marlboro, MA
Lines: 17

In article <70@excalibur.UUCP> 164485913@excalibur.UUCP (Schaffer) writes:
>In article <121@homxc.UUCP>, rps@homxc.UUCP (R.SHARPLES) writes:
>For some strange reason (no matter what path I use) when I try to get to
>my messages to Simtel20.arpa, they always seem to get stopped by the same
>node.  Alas, I have no acess to the program, so posting it in a fashion
>accessible to UUCP users would be helpful, to say the least!

Make sure that whatever path you use does NOT go through seismo!  They
block messages from simtel20 precisely because it causes so much
traffic.

   +----------------+  Jim Paradis                  linus--+
+--+-------------+  |  Encore Computer Corp.       necntc--|
|  | E N C O R E |  |  257 Cedar Hill St.           ihnp4--+-encore!paradis
|  +-------------+--+  Marlboro MA 01752           decvax--|
+----------------+     (617) 460-0500             talcott--+
You don't honestly think ENCORE is responsible for this??!!