Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utcsri!utegc!utai!garfield!dalcs!dalegass
From: dalegass@dalcs.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: 10 Mhz Problems
Message-ID: <2434@dalcs.UUCP>
Date: Wed, 11-Mar-87 20:30:05 EST
Article-I.D.: dalcs.2434
Posted: Wed Mar 11 20:30:05 1987
Date-Received: Thu, 12-Mar-87 03:36:00 EST
Organization: Dept. of Math., Stats & C.S., Dalhousie University, Halifax, N.S., Canada
Lines: 30


  
  Hello there,
  
     I purchased a XT clone recently that has a NEC-V20 cpu, and can be
  switched from 5Mhz to 10Mhz by pressing Control-Alt-Plus, unfortunatly
  however I have found that the machine "hangs" when it is in the 10Mhz
  mode for about 5-15 minutes. I complained to the people that sold it
  to me and they said that they had made an errror and that I could not
  have a CGA card (I have a RGB monitor) in a 10Mhz computer. According
  to them there are no CGA carss that can run at 10Mhz and they have
  suggested that when I am back in Toronto they will chnage my motherboard
  to make my computer a 8Mhz machine.
  
     I would really like the 10Mhz *and* a CGA card. Does this companies
  explaination for my problems should correct? If my CGA card is the
  problem, does anyone know of a CGA card that can run at 10Mhz?
  CGA card that can work at 10Mhz?
                                    Thanks in advance for your comments.
                                    

***************************************************************************
Dale Gass, Dalhousie U., Halifax, N.S., Canada

UUCP:   {seismo|watmath|utai|garfield}!dalcs!dalegass.UUCP
     				       or dalegass@dalcs.UUCP
        ...!dalcs!dalcsug!dalegass.UUCP  or dalegass@dalcsug.UUCP
CDN:    dalegass@cs.dal.cdn
CSNET:  dalegass%cs.dal.cdn@ubc.csnet
ARPA:   dalegass%cs.dal.cdn%ubc.csnet@CSNET-RELAY.ARPA