Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!sri-spam!ames!ucbcad!ucbvax!sdcsvax!nosc!humu!uhccux!aloha1!islenet!jons
From: jons@islenet.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: MicroSoft Windows
Message-ID: <3148@islenet.UUCP>
Date: Sat, 7-Mar-87 15:05:14 EST
Article-I.D.: islenet.3148
Posted: Sat Mar  7 15:05:14 1987
Date-Received: Fri, 13-Mar-87 00:23:48 EST
References: <75800026@uiucdcsp> <2228@sci.UUCP> <388@neoucom.UUCP> <1987Mar4.135307.22520@gpu.utcs.toronto.edu>
Reply-To: jons@islenet.UUCP (Jonathan Spangler)
Organization: Islenet Inc.,  Honolulu
Lines: 57

In article <1987Mar4.135307.22520@gpu.utcs.toronto.edu> gervers@gpu.utcs.UUCP (M. Gervers) writes:
>
>indra laksono
>DEEDS PROJECT
>
>Now the real question.  Does Ventura Publisher work with LASERJET + ?

I would like to read you the requirments straight from the Ventura Publisher
manual, Version 1.0:

	GRAPHICS CARDS
	- Hercules Graphics, or equivalent
	- IBM Color Graphics
	- IBM Enhanced Graphics
	- Micro Display Systems Genius graphics
	- Wyse 700
	- Xerox 6065 color display adapter
	- Xerox 6065 full page display
	- Xerox 6065 monochrome display adapter

	MICE
	- Microsoft Mouse (serial or mouse)
	- Mouse Systems PC Mouse (or following equivalent):
		- Summagraphics Mouse
		- Logitek Logi-mouse
		- Torrington Mouse
		- Microage Mouse
	- Xerox 6065 Mouse

	PRINTERS
	- Any PostScript compatible printer or typesetter
	- Apple Laserwriter or Laserwriter Plus
	- Epson MX-80/FX-80/RX-80
	- HP LaserJet Plus *
	- HP LaserJet w/ 92286F font cartridge
	- IBM Proprinter
	- Tall Tree Systems JLaser Printer card and compatible printer
	  (this includes most Canon-based lasers).
	- Xerox 4020 Color Ink Jet Printer
	- Xerox 4045 Laser Printer

NOTE: VENTURA PUBLISHER WILL NOT WORK UNLESS YOUR COMPUTER CONTAINS
THE HARDWARE LISTED ABOVE, INCLUDING A MOUSE AND A GRAPHICS BOARD FROM
THE ABOVE LIST. vENTURA PUBLISHER WILL ONLY PRINT ON THE PRINTERS SHOWN. 
IT WILL NOT WORK WITH A "DAISY WHEEL" TYPE PRINTER.

By the way, if anyone is interested, I'll post the new changes to Release
1.1 of the Publisher that was announced by Xerox Wednesday (March 4).
It includes more font selections with greater point size selection and
greater support for external graphic packages, including MS Windows and
Dr. Halo to name a few. In all, over 80 changes have been made.

Anyone interested? 

Aloha,
Jonathan Spangler
{ihnp4,vortex,dual}!islenet!jons