Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!sdcsvax!net1!graifer
From: graifer@net1.UUCP
Newsgroups: comp.sys.mac
Subject: Re: Power-Up failure
Message-ID: <411@net1.UCSD.EDU>
Date: Thu, 19-Feb-87 23:43:35 EST
Article-I.D.: net1.411
Posted: Thu Feb 19 23:43:35 1987
Date-Received: Sat, 21-Feb-87 02:36:49 EST
References: <406@net1.UCSD.EDU>
Reply-To: graifer@net1.UUCP (Dan Graifer)
Organization: U.C. San Diego
Lines: 11
Keywords: Mac+ Power-Up


I have received 4-5 mail msgs regarding my power up problems on my Mac+.  All
suggested the same thing: Stuck reset or interrupt switch.  Since my interrupt
switch is sometimes flakey (takes several hits to trigger) I suspect it's the
culprit.  Thanks to all of you who responded.
Dan Graifer
graifer@net1.UCSD.EDU
-- 
                              Dan Graifer
                              graifer@net1.UCSD.EDU
Disclaimer: Nobody ever listens to me anyways; Why should they start now?