Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!ANDREW.CMU.EDU!rs4u#
From: rs4u#@ANDREW.CMU.EDU.UUCP
Newsgroups: comp.sys.mac
Subject: RE: HyperDrives, GCC
Message-ID: <MS.V3.18.rs4u.80022e03.dorrance.ibm032.4666.0@andrew.cmu.edu>
Date: Fri, 13-Mar-87 10:17:20 EST
Article-I.D.: andrew.MS.V3.18.rs4u.80022e03.dorrance.ibm032.4666.0
Posted: Fri Mar 13 10:17:20 1987
Date-Received: Sat, 14-Mar-87 09:40:59 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: University of California at Berkeley
Lines: 15


While I didn't see the original post, allow me to say this.
 
We have (had) a large number of HyperDrives here, and we enjoyed (!!)
about a 60% failure rate. These are the old HyperDrives (1.0 hardware)
on regular 512K Macs. However, when we installed fans on the HII%Y+machines
all of the problems went away. Right now, I have a HyperDrive (2.0 hardware) ond
with a Fanny Mac fan, and it works *perfectly*. No Problems.
 
                --Rich
 
Richard Siegel
NASA/Langley Research Center
Materials Characterization Instrumentation Section
Hampton Virginia 23665