Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!necntc!ames!ptsfa!ihnp4!chinet!steinmetz!sprite!montnaro
From: montnaro@sprite.steinmetz (Skip Montanaro)
Newsgroups: comp.text
Subject: ditroff postprocessor wanted for Xerox 2700
Message-ID: <1276@steinmetz.steinmetz.UUCP>
Date: Mon, 9-Mar-87 17:46:37 EST
Article-I.D.: steinmet.1276
Posted: Mon Mar  9 17:46:37 1987
Date-Received: Tue, 10-Mar-87 23:07:35 EST
Sender: root@steinmetz.steinmetz.UUCP
Reply-To: steinmetz!sprite!montnaro (Skip Montanaro)
Distribution: na
Organization: General Electric CRD, Schenectady, NY
Lines: 17
Keywords: DWB Xerox 2700 ditroff postprocessors


We have a pair of Xerox 2700 laser printers for which we need a ditroff
postprocessor. We previously purchased Image Network's XROFF software for
them but were dissatisfied with their product. We subsequently purchased
EROFF from the Elan Computer Group (they market DWB 2.0) for some Sun
workstations and would like to find a DWB 2.0 compatible postprocessor for
the 2700s to run with it. (Elan does not market such a beast.) If you have
any information on such a product, please respond to me by mail at one of
the addresses below. If there is sufficient response I will summarize your
replies to the net.

Thanks,
Skip
-
ARPA: montanaro%desdemona.tcpip@ge-crd.arpa
UUCP: seismo!rochester!steinmetz!desdemona!montanaro
GE DECnet: csbvax::mrgate!montanaro@desdemona@smtp@tcpgateway