Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!seismo!mcnc!rti-sel!tijc02!seb022
From: seb022@tijc02.UUCP
Newsgroups: comp.unix.questions
Subject: Adding rp07 drive to VAX 11/78x, AT&T UNIX V rel. 2.0 ver. 2
Message-ID: <133@tijc02.UUCP>
Date: Thu, 26-Feb-87 13:27:51 EST
Article-I.D.: tijc02.133
Posted: Thu Feb 26 13:27:51 1987
Date-Received: Sat, 28-Feb-87 06:54:53 EST
Organization: Texas Instr., Johnson City TN
Lines: 34

From: Scott Bemis
	Texas Instruments,  Johnson City, Tenneessee
	Work Phone: (615) 461-2959
	mcnc!rti-sel!tijc02!root

I am considering adding a rp07 disk drive to a VAX 11/785. This VAX
is using AT&T's UNIX V Release 2.0 Version 2 operating system. Has
anyone done this before?  Please mail any experiences you may have
had to me.

What should be put in the dfile, in /usr/src/uts/vax/cf/dfile? I have not
added a disk drive attached to the massbus before.

The following entries are from the /etc/master file. It is the only entry
in this file for any rp* disk drive.  Can I add rp07 to the alias table -
just like what is done for the rp04 and rp05 disk drives. Or am I ignorant
of what I must do (if so, please enlighten me)?

rp06	1	76	515	hp	0	0	4	8	5
*


* The following entries form the alias table.
*
rp05	rp06
rp04	rp06
rl02	rl01
rl11	rl01
te16	tu16
tu45	tu16
tu77	tu16


Any advice would be appreciated.