Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!LOCUS.UCLA.EDU!seth
From: seth@LOCUS.UCLA.EDU.UUCP
Newsgroups: mod.computers.apollo
Subject: Problems with lpr/lpd
Message-ID: <8702260111.AA08837@hera.CS.UCLA.EDU>
Date: Wed, 25-Feb-87 20:11:13 EST
Article-I.D.: hera.8702260111.AA08837
Posted: Wed Feb 25 20:11:13 1987
Date-Received: Fri, 27-Feb-87 23:50:36 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 37
Approved: apollo@yale-comix.arpa

Has anybody out there successfully gotten /usr/lib/lpd to work under
SR9.5 DOMAIN-IX?  I have a laserwriter connected over an sio line to
a DN460 which is running /usr/lib/lpd.  lpr spools the files just fine
and the jobs get processed.  The problem is that the only thing that comes
out from the printer is the banner page.  The body of the file is getting
swallowed up somewhere.  Attached is the /etc/printcap file I'm using.
Any help would be appreciated.

#
# /etc/printcap generated: Tue Dec 16 07:38:52 PST 1986
# Modified 2/24/87 by SRG for use on the apollo ring.
#
# Local printers are:  ailab
#
#
# LOCAL printer: ailab
#
ailab|lw|Artificial Intelligence Laboratory:\
	:lp=/dev/sio3:\
	:br#9600:rw:fc#0000374:fs#0000003:xc#0:xs#0040040:mx#0:sf:sb:\
        :df=/tools/com/dvi2ps:\
	:if=/usr/lib/ps/psif:\
	:of=/usr/lib/ps/psof:\
	:gf=/usr/lib/ps/psgf:\
	:tf=/usr/lib/ps/pstf:\
	:nf=/usr/lib/ps/psnf:\
	:sd=/usr/spool/lpd/lw:\
	:lf=/usr/adm/ailab-errs:\
	:af=/usr/adm/ailab.acct:


						Seth Goldman

ARPA:   seth@LOCUS.UCLA.EDU
UUCP:   ...!{ihnp4,cepu,trwspp,sdcrdcf,ucbvax}!ucla-cs!seth
USMail: A.I. Lab, 3531 Boelter Hall, UCLA, Los Angeles, CA  90024  
MaBell: (213) 825-5199