Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!phcalamai
From: phcalamai@water.UUCP
Newsgroups: net.sources
Subject: Re: GNUPLOT and Apple LaserWriter Plus
Message-ID: <818@water.UUCP>
Date: Sat, 28-Feb-87 12:42:13 EST
Article-I.D.: water.818
Posted: Sat Feb 28 12:42:13 1987
Date-Received: Sun, 1-Mar-87 09:19:09 EST
Reply-To: phcalamai@water.UUCP (Paul H. Calamai)
Organization: U. of Waterloo, Ontario
Lines: 26

Has anyone out there had any success with GNUPLOT output
to an Apple LaserWriter. I've tried setting terminal
to postscript and output to COM2 (my LaserWriter is
connected to my IBM-PC this way) but I've had no luck
whatsoever (not even a flashing amber light!). I've
used
	mode com2:9600,n,8,2,p
and
	mode com2:9600,n,8,1,p
and
	mode com2:9600,n,8
and I've also tried resetting the LaserWriter Plus to use
DTR flow control via:

	serverdict begin 0 exitserver
	statusdict begin
	25 9600 4 setsccbatch
	end

as well as using the default settings for the 9600 position
on the server mode switch.

Does anyone have any ideas.

Thanks.