Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!kitty!larry
From: larry@kitty.UUCP
Newsgroups: sci.physics,sci.electronics,misc.wanted
Subject: Need information on Flow Corp. anemometer
Message-ID: <1628@kitty.UUCP>
Date: Mon, 2-Mar-87 22:41:29 EST
Article-I.D.: kitty.1628
Posted: Mon Mar  2 22:41:29 1987
Date-Received: Wed, 4-Mar-87 19:38:54 EST
Organization: Recognition Research Corp., Clarence, NY
Lines: 22
Keywords: Flow Corp., hot-wire anemometer, manual
Xref: utgpu sci.physics:809 sci.electronics:334 misc.wanted:596


	I realize that the following request is a real shot-in-the-dark,
but this is desperation time... :-)
	Does anyone know if another company acquired Flow Corp., formerly
located in Arlington, Mass.?  The company manufacturered hot-wire anemometers
and other process instrumentation.
	I'm trying to resurrect a chemical pilot plant which contains
several hot-wire anemometers made by Flow Corp.  I am having trouble with
the anemometer instrumentation, and have no manual.  No one with whom I have
spoken has any idea if Flow Corp. was acquired by another company, or just
simply bit the dust.
	While I can buy new air flow instruments, the cost will be several
$ K.  I believe that I can save this cost if I just had the schematic and
calibration procedure for the Flow Corp. instrumentation; the actual sensing
elements are good and I have spares - it's the signal conditioning circuitry
which has troubles.
	Thanks for any help!

<>  Larry Lippman @ Recognition Research Corp., Clarence, New York
<>  UUCP:  {allegra|ames|boulder|decvax|rocksanne|watmath}!sunybcs!kitty!larry
<>  VOICE: 716/688-1231        {hplabs|ihnp4|mtune|seismo|utzoo}!/
<>  FAX:   716/741-9635 {G1,G2,G3 modes}    "Have you hugged your cat today?"