Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!mit-eddie!genrad!decvax!dartvax!uvm-gen!cavrak
From: cavrak@uvm-gen.UUCP
Newsgroups: comp.dcom.lans
Subject: Question on GANDALF 2000's
Message-ID: <529@uvm-gen.UUCP>
Date: Thu, 2-Apr-87 07:38:45 EST
Article-I.D.: uvm-gen.529
Posted: Thu Apr  2 07:38:45 1987
Date-Received: Sun, 5-Apr-87 10:05:24 EST
Organization: EMBA Computer Facility, Univ. of Vermont, Burlington.
Lines: 21
Keywords: Gandalf, 19200 baud, DMZ, 7171


	Does anyone have experience with a Gandalf 1000 or 2000 running
at 19200 baud into BOTH (a VAX-8600 with) DMZ boards AND (an IBM-4381 
with) a 7171 front end?   Success or failure stories are equally welcome.

	Comments about other port selectors (Micom, Codex, etc.) running
at the same speeds are also welcome.

Thanks,

Stephen J. Cavrak		USENET:    ...!decvax!dartvax!uvm-gen!cavrak
Academic Computing Services	CSNET:     cavrak@uvm 
The University of Vermont 	
Burlington, VT   05405		MABELL:    (802) 656-3190


-- 
Stephen J. Cavrak		USENET:    ...!decvax!dartvax!uvm-gen!cavrak
Academic Computing Services	CSNET:     cavrak@uvm 
The University of Vermont 	OtherNET:  cavrak%uvm@csnet-relay
Burlington, VT   05405		MABELL:    (802) 656-3190