Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!UMASS.BITNET!SJONES From: SJONES@UMASS.BITNET.UUCP Newsgroups: comp.dcom.modems Subject: Need a little help with a `Smartmodem'... Message-ID: <8704062203.AA22376@ucbvax.Berkeley.EDU> Date: Mon, 6-Apr-87 16:52:00 EST Article-I.D.: ucbvax.8704062203.AA22376 Posted: Mon Apr 6 16:52:00 1987 Date-Received: Tue, 7-Apr-87 05:38:03 EST Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: The ARPA Internet Lines: 27 Friends; I have a slight problem. I'm running a Bulletin Board System on my Apple //e micro. I'm using old software, copyright '83, that doesn't support any ASCII driven 1200 baud modems - slight problem as I recently acquired a Smartmodem-compatible (down to the S registers) internal modem (the AppleMate by Ceremetek). I need some help.... I have drivers for the Micromodem ][ & some others, so I have the format. Here's the hitch - I don't have any assembly routines for controlling the AppleMatefrom machine language. THIS IS WHAT I NEED!! If you have any documentation or software, if you know where I can download it from, if I'm on the wrong track altogether, or if you have a clue as to where to write for something like Novations `Advanced Programmers Information' (that, I have. Does no good whatsoever in this case, but I have it...) Thanks, --Steve ***************************************************************************** Steve Jones: Student of, like, well you know: like, of all things: Disclaimer: I don't represent BITNET: sjones@umass :any entities, sentient, academic CSNET: sjones%hamp@umass-cs :or Corporate, other than myself UUCP: ...seismo!UMASS.BITNET!sjones :and "Squirrels and Chipmunks for INTERNET:sjones%umass.bitnet@wiscvm.wisc.edu:Nuclear Conflict Now!" :-) USSnail: box 753; Hampshire College; Amherst, MA 01002 =============================================================================