Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!seismo!rochester!kodak!gardner
From: gardner@kodak.UUCP
Newsgroups: comp.os.cpm
Subject: Re: converting a CP/M operation to IBM PC
Message-ID: <755@kodak.UUCP>
Date: Mon, 23-Mar-87 09:09:22 EST
Article-I.D.: kodak.755
Posted: Mon Mar 23 09:09:22 1987
Date-Received: Wed, 25-Mar-87 01:30:13 EST
References: <LIN.12288442266.BABYL@XX.LCS.MIT.EDU>
Reply-To: gardner@kodak.UUCP (dick gardner)
Distribution: world
Organization: Eastman Kodak Co, Rochester, NY
Lines: 29

In article <LIN.12288442266.BABYL@XX.LCS.MIT.EDU> LIN@XX.LCS.MIT.EDU writes:
>
>I currently run a Compupro S-100 system with CPM 2.2 or MPM 8/16 -- 8
>inch floppies.  Any ideas how I can transfer my important stuff
>(documents, spreadsheets, databases) to an IBM-compatible layout?
>
>I guess what I need is some way to write all my files onto a 5 1/4
>inch floppy that my IBM can read.
>
>Help?
>
	I think the easiest way is to do it is Kermit-Kermit file transfer.
I did this successfully when I made the switch from CP/M to PC-DOS.
Just connect serial ports together and go.  (You will probably have to
switch XMIT and RECV lines - 2&3)


=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

             Dick Gardner
             Eastman Kodak Co.
             Rochester, New York  14650
             (716) 477-1002
       UUCP: rochester!kodak!gardner

To err is human -- to really screw it up
		   you need a computer!
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#