Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!cbmvax!carolyn
From: carolyn@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: Help with Serial Printer
Message-ID: <1659@cbmvax.cbmvax.cbm.UUCP>
Date: Fri, 10-Apr-87 15:20:40 EST
Article-I.D.: cbmvax.1659
Posted: Fri Apr 10 15:20:40 1987
Date-Received: Sat, 11-Apr-87 19:26:23 EST
References: <5926@pur-ee.UUCP> <1658@cbmvax.cbmvax.cbm.UUCP>
Reply-To: carolyn@cbmvax.UUCP (Carolyn Scheppner CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 18
Keywords: Printer Serial RTS/CTS HELP

In article <1658@cbmvax.cbmvax.cbm.UUCP> carolyn@cbmvax.UUCP (Carolyn Scheppner CATS) writes:
>
>   You may have to drop both CTS and DSR to hold off the Amiga.

   I take this back.  I was just told that dropping DSR does more than keep
the Amiga from writing - it means the receiver has gone away and causes
a io error.

   So apparently, DSR should always be held the same.  Are you sure you're
not changing DSR when the IBM is not ready ?


-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Scheppner -- CBM   >>Amiga Technical Support<<
                     UUCP  ...{allegra,caip,ihnp4,seismo}!cbmvax!carolyn 
                     PHONE 215-431-9180
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=